Sekonic L-758D - Manual (Page 11)

-5-
ENGLISH
Shutter priority indicator, shutter speed display for still photography or frames per second (f/s) for
cinematography
Appears when Shutter Priority (T) is selected mode (see page 15)
Appears when shutter speed is in minutes
Appears when shutter speed is in full seconds
Appears when cine speed is set in frames per second (see page 19)
Battery Power Indicator (see page 7)
Memory / Multiple Flash Indicator Display
Appears when Multi (cumulative) flash measurement mode is selected and shows the
cumulated number of flash measurements (see page 24)
Appears when reading is memorized and shows the number in memory (see page 31)
Radio triggering channel and Quad-triggering zone display (see page 28)
Triggering Channel Numbers
Selective Quad-Triggering Zone
Camera profile selector display
USB icon
Appears when a USB cable is connected to the light meter and a computer.
2. Explanation of the Liquid Crystal Display
Analog Scale
Displays measured values as icons along the apertures or Latitude EV scale. The scale is graduated
in full or 1/3 stop increments for measurements. Memorized and averaged values are also display
along the scale.
• Aperture scale (upper scale) displays in all mode except Aperture priority mode.
f 0.7 to f 90 in full stops appears in all modes except aperture priority mode (L-758)
f 0.5 to f 64 in full stops appears in all modes except aperture priority mode (L-758CINE)
• EV scale (lower scale) displays in all mode except Multiple flash cumulative mode.
+/-7 stops from Mid.Tone (0) appears in aperture priority mode, or other modes if selected.
• Value display scale
Appear to indicate last measured/ memorized/ averaged values and brightness differ-
ence value below the aperture scale or above the latitude scale depending on which
scale has been selected.
Appears when measurement is below display range
Blinks when measurement is below measurement range
Appears when measurement is above display range
Blinks when measurement is above measurement range
Dynamic range/clipping point icons
Indicates dynamic range and clipping point of a selected camera exposure profiling.