Sony BDV-IT1000ES - Manual (Page 66)

66 US
Note
• Depending on the system status, the volume level
may not appear on the TV screen.
• When you set the [Control for HDMI] function to
[On], the TV that is connected to the system with an
HDMI cable (not supplied) can be sync-operated with
the system. For details, see “Using the Control for
HDMI Function for “BRAVIA” Sync” (page 95).
Tip
• You can change the speed at which the volume is
turned up and down.
To turn the volume up/down quickly, press and hold
the VOLUME +/–.
To set the volume up/down precisely, press the
VOLUME +/– briefly.
To turn the system off
Press "/1 while the system is on. The system
enters standby mode.
To save power in standby mode
Press "/1 while the system is on.
To enter power saving mode, make sure that the
system is in the following status.
– [Control for HDMI] is set to [Off] (page 95).
– [S-AIR Standby] is set to [Off] (page 92).
– [Standby Mode] is set to [Normal]
(page 116).
To use the headphones
Connect the headphones to PHONES jack on the
surround amplifier. The sound of the system is
muted. For details, see page “To enjoy the sound
by using headphones” (page 58).
Other operations
1) Scan speeds may differ with some discs.
2)
BD/DVD VIDEO/DVD-RW/DVD-R only.
3) BD/DVD VIDEO/DVD-RW/DVD-R/DVD+RW/
DVD+R only.
Note
• You may not be able to use the instant replay or
instant advance function with some scenes.
To play a restricted BD or DVD
(Parental Control)
When you play a restricted BD
Change [BD Parental Control] in [BD/DVD
Viewing Settings] (page 112).
When you play a restricted DVD
Change [DVD Parental Control] in [BD/DVD
Viewing Settings] (page 112).
When you play a restricted BD or DVD, the
display for entering your password appears on
the screen.
To Press
Stop x
Pause X
Resume play after pause X or H
Go to the next chapter >
Go back to the
preceding chapter . twice in a second.
When you press . once,
you can go to the beginning
of the current chapter.
Turn off the sound
temporarily MUTING
To cancel, press it again or
VOLUME + to adjust the
sound volume.
Stop play and remove
the disc A
Locate a point quickly
by playing a disc in fast
forward or fast reverse
(Scan)
1)
M or m while playing a
disc. Each time you press
M or m during scan,
the playback speed changes
as follows:
Playback direction
M1 (×10) t M2 (×30)
t M3 (×120)
Reverse direction
n (×1) t m1 (×10) t
m2 (×30) t m3
(×120)
When you press and hold
the button, fast forward/fast
reverse continues at the
selected speed until you
release the button.
To return to normal speed,
press H. Actual speeds
may differ with some discs.
Replay the previous
scene
2)
(instant replay) during
playback.
Briefly fast forward the
current scene
3)
(instant advance)
during playback.
To Press