Sony BDV-IT1000ES - Manual (Page 108)

108 US
5
Press X/x to select a setting, then
press .
The setting is selected and setup is
complete.
The options for the selected item appear.
Example: [4:3]
[Network Update]
You can update and improve the functions of the
system.
For information about update functions, refer to
the following website;
http://www.sony.net/
1
Press X/x to select [Network Update],
then press .
The unit connects to the network, and the
display asks for confirmation.
2
Press C/c to select [OK], then press
.
The unit starts downloading, then updating
the software automatically.
When updating finishes, “COMPLETE!”
appears for 5 seconds in the front panel
display, then the system automatically turns
off.
3
Press "/1 to turn the system on.
The system starts up with the updated
software.
Note
• Do not disconnect the AC power cord (mains lead) or
network cable while downloading or updating
software.
• Any operations, including opening the disc tray, are
not available while updating.
• Downloading times may differ depending on the
server provider or line status.
• When error messages on network connections
appear, check the network connections using
[Network Diagnostic] of [Internet Settings] in
[Network Settings] (page 117).
Tip
• The “UPDATE */9” counter (“*” indicates update
step) in the front panel display also shows progress of
the update.
• You can check the current software version by
selecting [System Information] in [System Settings]
(page 116).
• The [Setup] settings remain after updating.
• The system informs you of newer software version
information when [Software Update Notification] is
set to [On] (default) (page 116).
Setup
TV Type
Set the screen aspect ratio of your TV.
Screen Format Original
DVD Aspect Ratio Letter Box
Auto Cinema Conversion Mode
4 : 3
Selected setting