Sony BDV-IT1000ES - Manual (Page 111)

Se
ttings
and
Adjus
tme
nts
111 US
[Audio Settings]
You can make the audio settings.
x [BD Audio Setting]
Selects whether to mix or not mix interactive
audio and secondary audio (commentary) when
playing a BD that contains such audio.
[Mix]: Outputs the audio obtained by mixing the
interactive audio and secondary audio to the
primary audio.
[Direct]: Outputs the primary audio only.
x [Audio DRC] (BD/DVD VIDEO only)
You can compress the dynamic range of the
sound track. [Audio DRC] is useful for watching
movies at low volume late at night.
[Auto]: Performs playback at the dynamic range
specified by the disc (BD-ROM only). Other
discs are played back at the “Standard” level.
[Off]: No compression of dynamic range.
[Standard]: The system reproduces the sound
track with the kind of dynamic range that the
recording engineer intended.
[Max]: The system compresses dynamic range
fully.
x [Fs Limit]
You can select the upper limit of sampling
frequency in the audio signal for full sound
adjustment.
[On]: Sets to 48kHz. You can operate all of the
sound control functions of the system.
[Off]: Sets to 192kHz.
Note
• [Fs Limit] works only for the “BD/DVD,” “HDMI1,”
or “HDMI2” function.
• In DTS96/24 format, some sound control functions
do not work even if you set to [On].
x [Attenuate - TV]
Distortion may occur when you listen to a
component connected to the TV jacks.
Distortion is not a malfunction and will depend
on the component connected.
To prevent distortion, reduce the input level on
the unit.
[On]: Attenuates the input level. The output
level is changed.
[Off]: Normal input level.
x [Attenuate - SAT/CABLE]
Distortion may occur when you listen to a
component connected to the SAT/CABLE IN
jacks. Distortion is not a malfunction and will
depend on the component connected.
To prevent distortion, reduce the input level on
the unit.
[On]: Attenuates the input level. The output
level is changed.
[Off]: Normal input level.
x [Speaker Settings]
To obtain the best possible surround sound, set
the speakers. For details, see “Setting the
Speakers” (page 100).
x [Auto Calibration]
You can calibrate the appropriate settings
automatically. For details, see “Calibrating the
Appropriate Settings Automatically” (page 98).