Sony BDV-IT1000ES - Manual (Page 134)

134 US
Video Output Resolution
Output resolution differs depending on the [Output Video Format] setting in [Video Settings]
(page 109).
* Protected contents on DVDs are output at 480p resolution.
When [Output Video Format] is set to [Video or S Video]
480i video signals are output from the VIDEO OUT (VIDEO, S VIDEO) or COMPONENT VIDEO
OUT jack, and 480p video signals are output from the HDMI OUT jack.
Note
• The video input signal from the SAT/CABLE (VIDEO) jack or COMPONENT VIDEO IN (SAT/CABLE) jacks
is not output from the VIDEO OUT (S VIDEO) jack.
About the video output resolution of a connected component
* Available only when connecting a DIGITAL MEDIA PORT adapter that can output video signal.
Note
• You cannot change the video output resolution of a connected component.
Resolution
setting
When [Output Video Format] is set to
[HDMI] When [Output Video Format] is set to
[Component Video]
VIDEO OUT
(VIDEO,
S VIDEO)
jack
COMPONENT
VIDEO OUT
jack
HDMI OUT
jack
VIDEO OUT
(VIDEO,
S VIDEO)
jack
COMPONENT
VIDEO OUT
jacks
HDMI OUT
jack
480i 480i 480i 480i 480i 480i 480i
480p 480i 480i 480p 480i 480p 480p
720p 480i 480i 720p 480i 720p* 720p*
1080i 480i 480i 1080i 480i 1080i* 1080i*
1080p no picture no picture 1080p unselectable unselectable unselectable
Function Input jack
Resolution
of the input
video signal
Resolution of the output video signal
VIDEO OUT
(VIDEO)
jack
VIDEO OUT
(S VIDEO)
jack
COMPONENT
VIDEO OUT
jacks
HDMI OUT
jack
“SAT/CABLE”
VIDEO IN
jack
480i 480i no picture no picture 480p
COMPONENT
VIDEO IN
jacks
480i no picture no picture 480i 480p
480p no picture no picture 480p 480p
720p no picture no picture 720p 720p
1080i no picture no picture 1080i 1080i
“DMPORT”* DMPORT
jack
480i 480i no picture no picture 480p