Samsung Sound 80 - Manual (Page 28)

27
Stereo / Mono setting - FM
Your sound system will play stereo FM broadcasts in stereo provided that
the received signal is of adequate strength. However, as a stereo signal
becomes weaker the audio signal will become poorer. It may be preferable
to force the sound system to play the station in mono in order to reduce
the level of backgound hiss.
1. Press the On / Standby button to switch on your sound system.
2. Tune to the required FM radio station as previously described (see
pages 12, 13).
3. Press and hold the Tuning control to cause the radio station to play
the current station in mono.
The Mono override is a temporary setting and is applied to the currently
tuned station only. It is cancelled automatically by tuning to another
radio station.
4. If you wish to cancel the Mono override while listening to the currently
tuned radio station, press and hold the Tuning control again to cause
the radio to play the current station in stereo if the signal is suffi ciently
strong.
1
3,4