Launching 3g watcher, Connection to mp physical interface, Changing the physical interface – Sony MP595 User Manual
Page 42
AirLink MP595 / MP595W Modem User Guide
36
2130795
Launching 3G Watcher
To launch 3G Watcher:
1.
Start 3G Watcher by choosing
Start > Programs >
Sierra Wireless Inc > 3G Watcher > 3G Watcher
, or
double click the desktop shortcut.
Connection to MP Physical Interface
1.
Go to
Tools > MP Physical Interface
Note: MP Physical Interface shows disabled under Tools after the
connection is established.
2.
Select
USB, Ethernet,
or
Serial
.
Figure 4-3: Physical Port Selection
3.
If you select
Serial
, select the
COM
1 port.
4.
Click OK
The interface availability for connecting will be subject to the
usual interface priority of the MP.
Changing the Physical Interface
To change the physical interface:
1.
Click on the
Disconnect
button, if the watcher is connected
to your MP.
2.
Go to
Tools > MP Physical Interface