Samsung WB650 - Manual (Page 37)

Extended functions 36
Using GPS
Photos with geotagging can be taken.
Taking pictures with geotagging
When the GPS function is turned on, location information is
written on the photos. Your location can be checked since the
camera has a built-in GPS receiver.
In Shooting mode, select [
1
GPS ON] on the top of the
camera.
Press [
2
m].
Select
3
Geotagging and a desired setting.
GPS Valid Time
Settings
In case of failure in receiving a GPS signal, select
the time for reusing the most recently recorded
geotag.
(If the signal reception still fails even after the
valid time, the geotag is not recorded.)
Location Display
Display current location in Shooting mode.
(Displayed in Korean if it is set in Korean and in
English if it is set in other languages.)
GPS Reset
Select this if you wish to make a new search for
a GPS satellite near your location, not for a GPS
satellite currently used.
Map Information
Display version of GPS data information and Map
information provider.
S a p A h n d
Press [
4
m] to return to the Shooting mode.
Current location display London
Align your subject in the frame and press the shutter
5
halfway to focus.
Press [
6
Shutter] to take a picture.
A photo is captured with geotagging. t

The name of a location is displayed on the 1 display, t

3 thumbnail Display in Play mode.
Filter
Name of a location London
Geotags stored for a photo can be checked through the t

Intelli-studio program.