Sony BRAVIA KDL-20S2000 - Manual (Page 34)

34 GB
KDL-20S2020
2-685-333-41(0)
Sound
Problem Cause/Remedy
No sound, but good picture • Press 2 +/– or % (Mute).
• Check that “TV Speakers” is set to “On” in the “Sound Adjustment” menu
(page 22).
Noisy sound • See the “Picture noise” causes/remedies on page 33.
Channels
Problem Cause/Remedy
The desired channel cannot be
selected • Switch between digital and analogue mode and select the desired digital/
analogue channel.
Some channels are blank • Scrambled/Subscription only channel. Subscribe to the Pay Per View
service.
• Channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.
Digital channel is not displayed • Check that the aerial is plugged directly into the TV (not through other
equipment).
• Contact a local installer to find out if digital transmissions are provided in
your area.
• Upgrade to a higher gain aerial.
General
Problem Cause/Remedy
The TV turns off automatically
(the TV enters standby mode) • Check if the “Sleep Timer” is activated, or confirm the setting of “Off Time”
(page 24).
• If no signal is received and no operation is performed in the TV mode for
10 minutes, the TV automatically switches to standby mode.
The TV turns on automatically • Check if the “On Time” is activated (page 24).
Some input sources cannot be
selected • Select “AV Preset” in the “Set-up” menu and cancel “Skip” of the input
source (page 25).
The remote does not function • Replace the batteries.
010COV.book Page 34 Monday, June 12, 2006 3:29 PM