Samsung SCC-5399P - Manual (Page 8)

8 – DIGITAL COLOR DOME CAMERA
Introduction
1
2
4
Lens
9 10
11
3
8
12
Video connector
Power connector
5
6
6
7
7
1. Dome cover: Covers the inner cover, lens, and
main body to protect them.
2. Cover screw: Use it to assemble or
disassemble both dome cover and case.
3. Inner cover: Covers the main body to protect it.
4 .Wing locker: Push a long thin screwdriver into
its narrow spot and press it outward when you want
to remove the inner cover.
5. Main body: Includes a lens, a switch board, a
PCB board, screws, and such.
6. Screws for assembly and disassembly: Using
these 2 screws, the Main
body is closely connected to the Case.
7. Hooker: By pulling the left/right levers in the
arrow direction, the Main body can be detached
from the Case.
8. Case: Used as a ceiling or wall fi xture. It is
fi xed using four screws provided in the package.
9. Zoom lever: Using this lever, the lens zoom can
be adjusted and fi xed.
10. Focus lever: Using this lever, the lens focus can
be adjusted and fi xed.
11. Tilt fi xing screw: Using this screw, the slope of
the lens can be adjusted and fi xed.
12. Cable: Connect the Video connector to BNC
cable and Power connector to power adapter.
Components of your camera
Your camera has the following components:
•
❖