Operation instruction, Continued, B-7 machine info – SVAT Electronics CVDVR900 User Manual

Page 20: B-8 exit, C-1 compact flash card upgrade, C-2 compact flash card backup, C-3 playback compact flash card content, C-3-1 compact flash card management

Advertising
background image

OPERATION INSTRUCTION

continued

B-7 Machine Info:

Highlight and select Machine Info, then press [Enter] for this selection, the sub-menu will be

shown (as below), this allow to show all the machine ID number and software version.

B-8 Exit:

Highlight and select Exit, then press [Enter] to confirm for save the change of setting then

return back to main menu.

COMPACT FLASH CARD UPGRADE

AND OPERATION INSTRUCTION

C-1 Compact Flash Card Upgrade:

1. Using a PC to make sure your Compact Flash card formated into FAT32 format.

(if not already in the FAT32 format).

2. Insert the Compact Flash card into the DVR CF Slot while the DVR is turned off.

3. Press [ON/OFF] button without release to switch on the power;

4. Within 2~3 seconds the LED light (SYS and POWER) should be flashing and that means

that the upgrading is in progress.

5. Upgrading will take approx. 1 minute and both LEDs will turn off once upgrading has

completed.

6. Turn off the device and then remove the Compact Flash card from the slot.

7. Restart the device and the new software should be installed.

C-2 Compact Flash Card Backup:

In order to copy the data from hard disk into the Compact Flash card, please follow the

following procedures:

1. Insert the Compact Flash card into CF Slot before the DVR’s power is on.

2. Power on the device and stop all recording activity.

3. Press the [CF card] button in remote control or front panel, this will allow the copying

of all required information and data into Compact Flash card.

4. Re-Press the [CF card] button on the remote control or front panel to stop copying.

C-3 Playback Compact Flash Card Content:

In order to playback the data from the Compact Flash card, press [CF card] to enter the

Compact Flash card menu and use the cursor to select operation:

C-3-1 Compact Flash card management:

Highlight and select CF Manage, then press [Enter] for this selection, the sub-menu will be

shown (as seen below), this allows you to view all the information of the current CF card.

Info Menu

All

Record

Alarm

Record

Alarm

Log

Operate

Log

Channel

Status

HDD

Status

Machine Info

Exit

Machine Info

Unit ID.: 43743746194619463289573296

Version:

Return

CF Card Operation

CF Card Manage

Copy Information

Renew setting

Exit

CF Card Management

No Record

Previous Page

Next Page

Delete

Help: Press Enter to playback, press right key button

then Enter to delete

Disk Space: 000,060MB Availability: 000,057MB

Return

Advertising