Samsung Digimax U-CA5 - Manual (Page 57)

57
Starting play mode
On camera movie trimming : You can extract desired frames of movie clip during the movie
clip play back.
If the running time is under 10 seconds, the movie clip can’t be trimmed.
1. Select a desired movie clip in the play mode.
2. Play back the movie clip by pressing the Play & Pause
button.
3. Press the Pause button at the point of the movie clip that
you want to start extracting.
4. Press the T button. (The start point doesn't display on
the status bar, but the start point will be marked.)
5. Press the Play & Pause button and the extracted range
will be displayed on the status bar.
6. Press the Play & Pause button once more at the point
where you wish the extracted file to stop.
7. Press the T button and a confirmation window will
display.
8. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Trimming] : The extracted frames are saved as a new file
name.
[Cancel] : The movie trimming will cancel.
If you want to extract the movie clip at the beginning of the frame, press the Zoom T
button before starting the movie clip. (The start point doesn’t display on the status bar, but
the start point is selected.)
If the time line bar passes by the start point by pressing the REW(Left) button, the first
frame of the movie clip will display.
If you doesn t specify the ending point of the movie clip, the trimming confirmation
window will display at the point of the last frame.
INFORMATION
PLAY
REW FF
Trim:T Capture:SH
PLAY
REW FF
Trim:T
PLAY
REW FF
Trimming?
Trimming
Cancel
Confirm : OK