Sony SRX- R110 - Manual (Page 18)

18
Connecting the Projector
Chap
te
r 2
Pr
epa
ra
tio
n
s
Connecting the Projector
When you connect the projector, make sure to:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; loose connections may
increase noise and reduce performance of picture
signals. When pulling out a cable, be sure to pull it out
from the plug, not the cable itself.
• When installing the optional input board, consult with
the Sony dealer.
Refer also to the instruction manuals of the equipment to
be connected.
Connecting with HD-SDI Equipment
Attach the optional LKRI-002 HD-SDI (4:2:2) input board
to the input board attachment part, and connect the
HDCAM recorder/player.
Connecting with Component/Video
GBR Equipment
Attach the optional LKRI-001 analog input board to the
input board attachment part on the projector, and connect
with a DVD recorder/player or analog video equipment
equipped with the component output, or an high-definition
equipment equipped with a video GBR connector.
When connecting to the output of HD component
equipment, set “Signal Mode” of “Input Source” in the
PICTURE CONTROL window to “Y/Pb/Pr,” and when
connecting to the output of HD video GBR equipment, set
to “RGB.”
For details, see page 25. SRW-5000 HD DIGITAL VIDEO CASSETTE RECORDER
IN
INTER LOCK ETHERNET RS232C
OUT
IN OUT
IN connector
HD-SDI connecting cable
(not supplyed)
HDCAM recorder/player, etc.
Left side
to HD-SDI output
Note
INTER LOCK ETHERNET RS232C
R(P r /C r ) B(P b /C b ) HD VD G(Y/Y)
R(P r /C r ) B(P b /C b ) HD VD G(Y/Y)
IN OUT
IN OUT
R/P r / G/Y / B/P b
connectors
Component cable, etc
(not supplied)
Betacam, DVD recorder/player, etc.
Left side
to component output/
video GBR