Samsung ML-4600 - Manual (Page 95)

P
ROBLEM
S
OLVING
7.18
Troubleshooting Error Messages
While printing in the manual feed mode, the printer is waiting for the Demo
button to be pressed.
• Press the Demo button on the control panel to start printing. You must press the
button to print each page after loading paper into the manual input tray.
Waiting for the Demo button to be pressed
Data Error Paper
The printer front cover may be opened.
• Check that the printer front cover door is closed properly.
Door open
Data Error Paper
While your printer is canceling a job (see page 5.5 ), the Error light blinks.
When canceling is completed, this message will automatically be cleared.
Otherwise, the printer memory ran out of memory in the middle of a print job.
The page being printed may have been too complex for the memory capacity of
the printer. Press the Cancel/Reprint button to cancel the current job.
• Try to free some printer memory by removing any unnecessary fonts, macros, or
any data currently in printer memory.
• Simplify the image or print at a lower resolution.
• Install the optional memory card to expand the memory capacity of your printer.
See “Installing Optional Memory Card” on page A.30 .
Canceling a job or memory out
Data Paper Error
• Reset the printer by briefly turning the printer off and back on again.
• If the error persists, contact a service representative.
System error - Fuser or LSU error
Data Error Paper