Sony MZ-R700DPC - Manual (Page 48)

48
2
Press ENTER (ENTER).
The disc is ready to be labeled.
3
Press <MENU, (flip the lever towards > or .)
repeatedly to select a letter and press ENTER (ENTER).
The selected letter stops flashing and the cursor moves to the
next input position.
4
Repeat step 3 and enter all characters of the label name.
To cancel labeling, press T MARK (T MARK).
5
Press ENTER (ENTER) for 2 seconds or more .
The track or disc is labeled.
Labeling a track during playback
1
Insert a disc and play the track you want to label.
2
Press ENTER (EDIT for 2 seconds or more), press <MENU,
(flip the lever towards > or .) repeatedly until “EDIT”
flashes in the display, and then press ENTER (ENTER) again.
“
: Name” flashes in the display.
3
Press ENTER (ENTER).
The track is ready to be labeled.
Press To
X (CAPS) Switch between capital letters, small
letters and marks / numbers.
VOL +/– (VOL +/–) Move the cursor to the left or right.
<MENU,
(
> or .)
Change the letter to the one before / next
one.
END SEARCH/VOL +
(EDIT) Insert a blank space to type in a new
letter pressing both buttons together.
END SEARCH/VOL –
(DELETE) Delete a letter and move back all
following letters to the left pressing both
buttons together.
T MARK (T MARK) Cancel labeling.