Samsung SCX-4116 User Manual
Page 129
T
ROUBLESHOOTING
8.12
Line Busy
(only for SCX-4216F)
The remote party did not
answer or the line is
already engaged.
Try again after a few minutes.
Line Error
(only for SCX-4216F)
Your machine cannot
connect with the remote
machine or has lost
contact because of a
problem with the phone
line.
Try again. If the problem persists,
wait an hour or so for the line to
clear and try again.
Or, turn the ECM mode on. See the
Facsimile User’s Guide.
Load Document
You have attempted to set
up a copy or fax operation
with no document loaded.
Load a document and try again.
LSU Error
A problem has occurred in
the LSU (Laser Scanning
Unit).
Unplug the power cord and plug it
back in. If the problem persists,
please call for service.
Memory Full
(only for SCX-4216F)
The memory is full.
Delete unnecessary documents,
retransmit after more memory
becomes available or split the
transmission into more than one
operation.
No Answer
(only for SCX-4216F)
The remote fax machine
has not answered after
several redial attempts.
Try again. Make sure that the
remote machine is operational.
No Cartridge
The toner cartridge is not
installed.
Install the toner cartridge. See
No. Not
Assigned
(only for SCX-4216F)
The speed dial location
you tried to use has no
number assigned to it.
Dial the number manually using the
number keypad or assign the
number. See the Facsimile User’s
Guide.
No Paper
The paper in the paper
tray has run out.
Load paper in the paper tray. See
Operation Not
Assigned
(only for SCX-4216F)
You are doing in the Add/
Cancel operation, but
there is no jobs waiting.
Check the display to see if there is
any scheduled job. The display
should indicate them in Standby
Mode, for example, Delay Fax.
Display
Meaning
Suggested solutions