Using the bypass tray – Samsung SCX-4116 User Manual

Page 59

Advertising
background image

P

APER

H

ANDLING

3.8

N

OTES

:

• If you experience problems with paper feed, place the paper in

the Bypass tray.

• You can load up to 150 sheets of

previously printed paper. The printed

side should be facing up with an

uncurled edge at the top side. If you

experience problems with paper

feed, turn the paper around. Note

that the print quality is not

guaranteed.

Using the Bypass Tray

Use the Bypass tray to print transparencies, labels, envelopes or

postcards in addition to making quick runs of paper types or

sizes that are not currently loaded in the paper tray.
Postcards, 3.5 by 5.83 in.(index) cards and other custom-sized

materials can be printed with this printer. The minimum size is

76 by 127mm(3.0 by 5.0 in.) and the maximum size is 216 by

356mm(8.5 by 14 in.)

Acceptable print materials are plain paper with sizes ranging

from 100 x 148 mm (3.9 x 5.8 in.) to Legal, 216 x 356 mm

(8.5 x 14 in.), the largest size acceptable, and weighing between

16 lb and 32 lb.

N

OTES

:

• Always load only the print materials specified in the

Specifications on page A.6 to avoid paper jams and print quality

problems.

• Flatten any curl on postcards, envelopes and labels before

loading them into the Bypass tray.

• When you print on 76mm X 127mm (3 X 5 in.) sized media with

loading into the tray, open the rear output tray.

1

Load a sheet of the print material with the print side face
up and into the center of the tray.

Advertising
This manual is related to the following products: