Me(h4dotc)-47, Engine assembly – Subaru Impreza 2004 User Manual
Page 48
ME(H4DOTC)-47
MECHANICAL
Engine Assembly
(4) Remove the other bolts while rotating the
engine using socket wrench.
22) Remove the pitching stopper.
23) Disconnect the fuel delivery hose, return hose
and evaporation hose.
NOTE:
• Catch fuel from the hose into container.
• Disconnect the hose with its end wrapped with
cloth to prevent fuel from splashing.
24) Remove the fuel filter and bracket.
25) Support the engine with a lifting device and
wire ropes.
26) Support the transmission with a garage jack.
NOTE:
Before moving the engine away from transmission,
check to be sure no work has been overlooked. Do-
ing this is very important in order to facilitate re-in-
stallation and because transmission lowers under
its own weight.
27) Separation of the engine and transmission.
(1) Remove the starter. <Ref. to SC(H4SO)-7,
REMOVAL, Starter.>
(2) Install the ST to torque converter clutch
case. (AT model)
ST
498277200
STOPPER SET
ME-00044
MT-00069
ME-00045
ME-00046
ME-00047
ME-00048
ST
ME-00049