Sanyo VPC-HD1010EX - Manual (Page 21)

20
Eng
lish
Using the flash
1
Press the m button to open the
flash unit.
h The flash unit opens.
2
Display the SIMPLE Mode Shooting Menu (page 13), select the flash
setting, and press the SET button.
h The screen to select the flash operation appears.
3
Select the desired flash operation, and press the SET button.
h This completes the flash operation setting.
4
Press the [ ] button to take the picture.
9: The camera detects the subject brightness and uses the flash only
when necessary.
:: The flash operates with every image captured regardless of the
conditions.
;: The flash does not operate even in dark situations.
<: The camera detects the subject brightness and uses the flash only
when required. At this time the flash operates in a manner that
reduces the red reflection (“red-eye”) in the subject’s eyes.