Sanyo SC-X1801R - Manual (Page 8)

2. Clean Filters:
HEPA filter;
1)
Open the front cover: Press the buttons at the both side of socket hole
and open it slowly.
Figure_9,Figure_10
2) Dump the dust collection out of the dust cup. Figure_11
3) Rotate the filter and detach from the filter grill. Wash the filter in warm
water and clean it with bush. Then, dry it completely before put it back
to the dust cup. Be sure to dry naturally to prevent deformation.
Figure_12
Motor exhaust filter;
1) Take out the filter (
Figure_13, 14 ) and wash in warming water. It can be
used after drying completely before put it back to the dust cup and be
sure to dry naturally to prevent deformation.
It should be rinsed once a year.
If the filter is damaged, a new filter should be replaced.
Figure_14 Figure_13
Figure_11 Figure_10
Figure_12
Figure_9
6