Sharp Aquos LC 37GB5U - Manual (Page 16)

15
Watching TV
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Press c/d to select “Air”, “Cable” for
ANALOG.
Press ENTER to enter the setting.
Initial setup
When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you
live. Perform the following steps before you press TV POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 7.)
2. Connect the antenna cable to the TV. (See page 13.)
3. Plug in the AC cord to the AC outlet. (See page 6.)
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
3 1
2
Language
Air/Cable
CH Search English
Español
Français
Air/Cable
Language
CH Search Air ANALOG
Language setting
Select from among 3 languages: English, French and
Spanish.
Antenna setting
Make sure what kind of connection is made with your TV
when selecting “Air” or “Cable”.
Example
Press c/d to select “Yes” for ANALOG, then
press b to move down.
Press c/d to select “Yes” for DIGITAL (Air),
then press b to move down.
Select “Search Start”, and then press
ENTER.
ANALOG Yes
DIGITAL (Air)
No
Yes No
Language
Air/Cable
CH Search
Search Start
CH Search
ANALOG [ ] 25 [ ] 20 Found Air
CH Search
DIGITAL [ ] 25 [ ] 20 Found Air
2
Air ANALOG
Audio : MONO
Example
NOTE
• If no channel is found, make sure what kind of connection
is made with your TV and try EZ setup again. (See page
20.)