SonicWALL ViewPoint - Manual (Page 14)

Page 13
The installation wizard will guide you through the set up
and install ViewPoint reporting software and syslog server,
Tomcat Web Server, and MySQL Database. Please refer to
the Appendix for more information about these software
components.
The ViewPoint setup program will detect whether the de-
fault Web, syslog or MySQL ports are in use. If the default
Web port is active, the setup program will automatically
recommend an alternative Web port, port 8080. If either
syslog port 514 or MySQL port 3306 are active, the ViewPoint
setup program will display an error message.
Note: If you have a syslog server already installed on your
computer, you must remove the existing program and install
the syslog server provided with SonicWALL ViewPoint.
The Installation Wizard will prompt you to define the
ViewPoint Web Server port. The default Web (HTTP) port is
port 80.
Note: If you have a Web server already installed on your com-
puter, then configure the ViewPoint’s Web server to run on
an unused HTTP port, such as the recommended port, 8080.
The Installation Wizard will prompt you to define additional
settings, such as the SonicWALL LAN IP address and the
SonicWALL administrator password.
Once the programs have been installed, you may close the
ViewPoint Installation Wizard window. You will need to re-
start your computer for the changes to take effect.