Sony Camcorder / Wireless Microphone - Manual (Page 9)

Works with: DVCAM models w/ CA-WR855 (optional adapter), or *Anton Bauer QR-DSR optional adapter with
ABWMKKIT wireless adapter plate.
DVCAM
Models:
DSR-500WS
DSR-300 (A)
DSR-200(/A)
1 2
DSR-130WS
2
1 Requires DABK-L201 adapter
2
Supplied with NP-1 box. Requires optional BTA-801 adapter.
DVCAM/CAWRR-855A
ass’ly shown in breakout with
BPL-60A battery
DVCAM/CAWR-855A
(Shown assembled)
DVCAM/CAWR-855A
Shown assembled
(rear angle)
WRR-855A inserted
into BTA-801 adapter
and mounted to a
BVW-600WS via the
NP-1 battery box.
Power is provided via
a 4-pin DC connector
on camcorder (cable
supplied with BTA-
801). A WRR-810A
or WRR-805A may
also be mounted to
the NP-1. The WRR-
805A also requires
the optional X-0248-
167-1 dual bracket.
Typical package:
Required part QTY
WRR-855A, WRR-810A or WRR-805A 1
BTA-801 (for WRR-855A only) 1
* Optional X-0248-167-1bracket (for
WRR-805A only) 1
* Transmitter 1
Typical Package:
(DSR-300 / 500WS)
Required Part
QTY
WRR-855A (ch) 1
CA-WR855 1
*Transmitter 1
Configuration #3: WRR-855A UHF Diversity Tuner
* A WRR-810A or WRR-805A may also be mounted to
DVCAM models. WRR-810A requires the use of the
optional A-8278-057-A bracket. The WRR-805A also
requires this, plus the X-0248-167-1 dual bracket. These
may not be mounted in additional to the CA-WR855
adapter box, as this leaves no additional space on the rear
of the camcorder to mount the A-8278-057-A bracket.
-7-
Fig. 8
Fig. 9
Fig. 10
Fig. 11