Simaudio 320 S - Manual (Page 7)

MOON 320S Power Supply
310LP Internal Settings
A B A B
Figure 1: MOON 310LP Circuit Board layout
Prior to connecting your MOON 310LP Phono Preamplifier to the MOON 320S Power Supply, you must move two (2)
internal jumpers inside your MOON 310LP. Please refer to page 8 of your MOON 310LP owner’s manual for detailed
instructions on how to remove the chassis cover. Referring to the above diagram of the 310LP, you will see an array of four
(4) jumper sockets labeled STR1, STR2, STR3 and STR4. The factory default position for the 2 jumpers is in sockets STR2 and
STR4 (positions B in figure 1). To properly operate the MOON 310LP in conjunction with the MOON 320S, you will need to
move these 2 jumpers into sockets STR1 and STR3 (positions A in figure 1). Failure to make these adjustments may cause
damage that is not covered by warranty.
____________________________________________________________________________________
310LP Internal Settings 7