Sony Ericsson 1102101-BV - Manual (Page 17)

This is the Internet version of the user's guide. © Print only for private use.
Personalizing your phone 17
Tip: Use the volume keys on the side of the phone to
scroll silently.
Specific ring signals for personal calls
If your subscription includes the Calling Line
Identification service, you can assign a personal ring
signal to up to ten callers.
If the last seven digits of a caller’s number
correspond to a number you have specified, then that
caller’s ring signal is used.
You can include question marks in a phone number.
For example, 012345??? means that calls from phone
numbers between 012345000 and 012345999 will
have the same personal ring signal. Press and hold
to insert a question mark.
To set a specific ring signal for a caller
1. Scroll to Settings, YES , Sounds & alerts, YES , Ring
signals, YES , Personal rings, YES , Add new?, YES .
2. Enter the caller’s number and press YES .
Press to retrieve a number from the phone book.
3. Select a ring signal and press YES .
Composing your own ring signal
You can compose ten different ring signals.
To compose or edit a ring signal
1. Scroll to Settings, YES , Sounds & alerts, YES , My
melodies, YES .
2. Select one of the melodies and press YES .
3. Press to remove notes.
4. Use the keypad to enter notes:
• Press and hold a key to enter a
long note.
• Press to raise the note
one octave.
• Press once to raise the note
one semitone.
• Press twice to lower
the note one semitone.
5. To listen to your melody, press YES .
6. Press YES again to save it or press NO to continue
composing.
Vibrating alert
You can choose to be notified of an incoming call
by the buzzing of the Vibrating alert. You can set the
phone’s Vibrating alert to one of the following:
• On (all the time)
• On if silent (on when the ring volume is turned off
or when you have set the phone to silent)
• Off (all the time)