Phone setup – Siemens M30 User Manual

Page 21

Advertising
background image

39

Factory settings

Select »Factory settings« and your

phone will automatically revert to

its original setup:

Watch:

24h mode

Language:

Automatic

Network

selection:

Automatic

Ringing tone:

Standard

Ringing

volume:

High

SMS tone

volume:

High

Broadcast tone

volume:

High

Key tone:

On

Dial mode:

Speed dialling

Greeting:

None

Facts & Tips

• Read about location numbers in the

chapter about your phone book (p. 12)

• USSD

(Unstructured

Supplemen-

tary Service Data) is a feature com-

pletely defined by your network allow-

ing direct communication between

you and your network. An example of

a USSD could be that entering a cer-

tain code of digits and/or letters termi-

nated by a

#

tells your network to

send you a scale of charges.

• The survey at p. 12 tells you how to

find the different characters on your

phone’s keypad when you want to

write e.g. a USSD or a new welcome

greeting.

Setup menu

Phone setup

38

Enter the setup menu
by pressing »MENU«

Select »Phone setup«

Dial mode

Dial mode allows you to choose

between the following two fea-

tures. These two features cannot

be active at the same time, and

selecting one of them will automat-

ically deactivate the other:

Speed dialling Activate »Speed

dialling« to make it possible to call

any numbers in your phone book

just by using the location number.

Press the location number for one

second, and the call will be initiated

automatically. If the location num-

ber consists of more than 1 digit,

press the first digit(s) and hold the

last digit for one second.

Text dialling Activate »Text dialling«

to set the phone in alpha mode.

This enables you to enter a USSD

with both letters and digits instead

of only digits. Remember that a

USSD must always be terminated

by pressing the # key and then

»CALL«.

Greeting

Make a welcome greeting on your

phone according to your own wish-

es. Delete the old greeting, if any,

by holding down »CLEAR«, enter

the new greeting via the keypad

and confirm by pressing »OK«.

(This function may not be available

on all networks).

Setup menu

First

User guide M30 GB 01/09/00 10:38 Side 38

Advertising