Samsung SP-P400B - Manual (Page 27)

Menu Position You can move Menu Position up/down/left/right.
Menu
Translucency
You can set the translucency of menu.
1) Opaque
2) Low
3) Medium
4) High
Menu Display
Time
You can set the display time of the menu.
1) 5 sec 5) 90 sec
2) 10 sec 6) 120 sec
3) 30 sec 7) Stay On
4) 60 sec
Logo If Logo mode is enabled, the Samsung logo is displayed when the projector is turned
on. If disabled, it is not displayed.
Blue screen The Blue screen function causes the screen to change to the Blue screen if there is no
signal input from the external device connected to your projector.
1) Off
2) On
Information You can check external source signals, picture setup, PC picture adjustment.