Sony F500 - Manual (Page 45)

O
th
e
r O
p
era
tions
45 GB
Using the Control for
HDMI Function for
“BRAVIA” Sync
This function is available on TVs with the
“BRAVIA” Sync function.
By connecting Sony components that are
compatible with the Control for HDMI function
with an HDMI cable, operation is simplified as
below:
– System Power Off (page 46)
– One-Touch Play (page 46)
– Theatre Mode (page 46)
– System Audio Control (page 46)
– Volume Limit (page 46)
– Audio Return Channel (page 47)
– Remote Easy Control (page 47)
– Language Follow (page 47)
Control for HDMI is a mutual control function
standard used by CEC (Consumer Electronics
Control) for HDMI (High-Definition
Multimedia Interface).
The Control for HDMI function will not work
when you connect this system to a component
which is not compatible with the Control for
HDMI function.
There are convenient buttons on the system’s
remote for operating the TV, such as
THEATRE, ONE-TOUCH PLAY, and TV "/1.
For details, see “Remote control” (page 12) and
refer to the operating instructions of the TV.
Note
• Depending on the connected component, the Control
for HDMI function may not work. Refer to the
operating instructions supplied with the component.
• The Control for HDMI function may not work if you
connect other than a Sony component, even if the
component is compatible with the Control for HDMI
function.
(Control for HDMI - Easy Setting)
If your TV is compatible with the Control for
HDMI - Easy Setting function, you can set the
system’s [Control for HDMI] function
automatically by setting the TV. For details,
refer to the operating instructions of the TV.
If the TV is not compatible with the Control for
HDMI - Easy Setting function, set the Control
for HDMI function of the system and TV
manually.
Note
• For details on setting the TV, refer to the operating
instructions of the TV.
1
Make sure that the system and the TV
are connected with an HDMI cable.
2
Turn on the TV and press [/1 to turn on
the system.
3
Set the Control for HDMI function of the
system and TV.
The Control for HDMI function for the
system and TV is simultaneously set to on.
To set the [Control for HDMI]
function of the system to on/off
manually
1
Press HOME.
The home menu appears on the TV screen.
2
Press C/c to select [Setup].
3
Press X/x to select [System Settings],
then press .
4
Press X/x to select [HDMI Settings],
then press .
The [HDMI Settings] display appears.
5
Press X/x to select [Control for HDMI],
then press .
Other Operations
THEATRE
BRAVIA Sync
TV
ONE-TOUCH
PLAY
2 3 1
Preparing for the Control for
HDMI function