Samsung HW-D7000 - Manual (Page 30)

30
English
Connections
Video Conversion Flow According to the Connected Port
As shown in the illustration, if the unit’s HDMI Out is connected to a TV or monitor, the analog video source
(composite or component) from the video device is processed for up-conversion automatically for HDMI output.
If connected to a TV or monitor through Composite or Component ports, corresponding analog signal will be
output respectively, without any conversion. In case if the unit and video source device is connected in multiple
methods (Component and Composite video) at the same time: Video input signal is automatically selected in the
order of Component Video
➝ Composite Video.
NOTE
This enables upconverting up to a quality of 1080p.
Auto conversion is not applied to a video source incoming from HDMI IN port.
The maximum resolution of the input video signal is 480i, and it will not support higher input resolution.
Video conversion is compatible with the NTSC color system only.
✎




HDMI 1 (SAT) ARC (MONITOR) (GAME) HDMI 2 (AUX1) HDMI 3 (AUX2) HDMI 4
HDMI IN HDMI OUT iPod LAN
VIDEO IN COMPONENT IN/OUT VIDEO OUT SAT GAME TV 1 (SAT) 2 (GAME) MONITOR
AUDIO IN IN OUT SAT GAME TV CD
Y
PB/CB
PR/CR
OPTICAL 1 (SAT) OPTICAL 2 (GAME) OPTICAL 3 (TV) COAXIAL (CD)
SUBWOOFER OUT
FRONT FRONT SURROUND SURROUND CENTER
SPEAKERS OUT
SURROUND BACK /FRONT HEIGHT SURROUND BACK /FRONT HEIGHT
FM ANT
SPEAKER IMPEDANCE : 4~8
HDMI IN
COMPONENT IN
VIDEO IN
HDMI IN HDMI OUT
COMPONENT IN
VIDEO IN
HDMI OUT
COMPONENT OUT
VIDEO OUT
COMPONENT OUT
VIDEO OUT
Video
Conversion
Input
Signal
Output
Signal
HW-D7000_XAA_0321.indd 30 HW-D7000_XAA_0321.indd 30 2011-03-21 2:01:36 2011-03-21 2:01:36