Sony RHTG2000 - Manual (Page 24)

24 US
Automatic outputting of the original
sound
x AUTO FORMAT DIRECT AUTO
The auto decoding function automatically detects the type of
audio signal being input (Dolby Digital, DTS, or standard 2
channel stereo) and performs the proper decoding if
necessary. This mode presents the sound as it was recorded/
encoded, without adding any effects (e.g. reverberation).
However, if there are no low frequency signals (Dolby Digital
LFE, etc.), it will generate a low frequency signal for output
to the subwoofer.
Outputting 2 channel sources like CDs
by 5.1channel
x Dolby Pro Logic
Dolby Pro Logic produces five output channels from 2
channel sources. This mode performs Pro Logic decoding to
the input signal and output to front, center, and surround
speakers. Meanwhile, the surround channel becomes
monaural.
x Dolby Pro Logic II MOVIE/MUSIC
Dolby Pro Logic II produces five full-bandwidth output
channels from 2 channel sources. This is done using an
advanced, high-purity matrix surround decoder that extracts
the spatial properties of the original recording without adding
any new sounds or tonal colorations.
• When the input signal is multi channel source, Dolby Pro Logic and
Dolby Pro Logic II MOVIE/MUSIC are canceled and the multi
channel source is output directly.
• When the bilingual broadcast sound is input, Dolby Pro Logic and
Dolby Pro Logic II MOVIE/MUSIC are not effective.
Using only the front speaker and
subwoofer
x 2CH STEREO
This mode outputs 2 channel sound regardless of the audio
signal type being input.
Outputting sound sources from TV
x NEWS
This mode clearly reproduces human voice in TV programs,
such as news programs or dramas.
Outputting 2 channel sources from the
front, center, and surround speakers
x MULTI ST.
This mode outputs 2 channel sources from the front, center,
and surround speakers simultaneously. The sound that is
output from the surround speakers is same as the sound that is
output from the front speakers.
• The system memorizes the last sound field selected for each input.
In TUNER function mode, the same sound field is memorized for
both FM and AM.
Note
Tip