Using the sleep timer, Naming preset stations – Sony RHTG2000 User Manual

Page 20

Advertising
background image

20

US

Naming preset stations

You can enter a name for preset station. The name (for
example, “XYZ”) appears when the station is selected.
Note that no more than one name can be entered for each
preset station.

1

Press TUNER/BAND repeatedly until “FM” or “AM”
appears.

The last station you received is tuned in.

2

Press PRESET + or – repeatedly to select the
preset station you want to create an index name
for.

3

Press TUNER MENU.

4

Press

C/X/x/c repeatedly until “Name In?”

appears.

5

Press ENTER.

6

Create a name by using the cursor buttons.

Press

X/x to select a character, then press c to move the

cursor to the next position.
Letters, numbers, and other symbols can be input for a
radio station name.

If you make a mistake

Press

C/c repeatedly until the character to be changed

flashes, then press

X/x to select the desired character.

To erase the character, press

C/c repeatedly until the

character to be erased flashes, then press CLEAR.

7

Press ENTER.

The station name is stored.

• You can check the frequency by pressing DISPLAY repeatedly.

To change the AM tuning interval

The AM tuning interval can be set to either 10 kHz or 9 kHz.
To change the AM tuning interval, first tune in any AM
station, then turn off the system by pressing "/1 on the
system. While holding down INPUT SELECTOR, press "/1
on the system to turn on the power. If you change the interval,
AM preset stations will be erased.
To reset the interval, repeat the same procedure.

You can set the system to turn off at a preset time, so you can
fall asleep listening to music. You can preset the time in 10
minutes decrements.

Press SLEEP.

Each time you press this button, the minutes display (the
remaining time) changes as follows:

To check the remaining time

Press SLEEP once.

To change the remaining time

Press SLEEP repeatedly to select the desired time.

To cancel the Sleep Timer function

Press SLEEP repeatedly until “SLEEP OFF” appears.

• This function is only for this system, not for the connected TV or

other components.

Tip

Using the Sleep Timer

Note

H

X

M

m

.

>

-

ENTER

CLEAR

x

O

SLEEP

SLEEP 90M

t SLEEP 80M t SLEEP 70M

R

r

SLEEP OFF

T SLEEP 10M ..... SLEEP 60M

Advertising
This manual is related to the following products: