Controlling the connected components, Input sync), Programming the remote for tv operation – Sony RHTG2000 User Manual
Page 9: Sony tv only) (input sync)
9
US
If you connect your TV by jacks other than VIDEO IN 1 or
HD/DVD IN 5 (see the supplied “Quick Setup Guide”),
follow the steps below to program the remote. The TV input
will be selected automatically (Input SYNC).
1
Press the input button for the component you want
to change while holding down RM SETUP.
The indicator lights up.
• Press the RM SETUP button using a pointed object.
2
See the table below for the remote button
corresponding to the TV input jack you have
connected to, and press the button.
* TV input jack name may differ depending on your TV model.
3
Press ENTER.
The indicator slowly flashes twice and the remote
automatically exits the programming mode.
To disable this function
Press ENTER while holding down 0 in step 2. The TV input
will not be selected automatically even if you press the input
buttons.
Controlling the connected components
Programming the remote for TV
operation (Sony TV only)
(Input SYNC)
Note
TV input jack*
Remote Button
VIDEO 1
1
VIDEO 2
2
VIDEO 3
3
VIDEO 4
4
VIDEO 5
5
VIDEO 6
6
VIDEO 7
7
VIDEO 8
8
COMPONENT 1
9
COMPONENT 2
AUDIO
COMPONENT 3
SUBTITLE
COMPONENT 4
ANGLE
H
X
M
m
.
>
-
ENTER
CLEAR
x
RM SETUP
Input buttons
Numeric buttons, etc.
ENTER