Snom 190 - Manual (Page 81)

80 • Call Register
[
S N O M
1 9 0 A
D M I N I S T R A T O R
M
A N U A L
V 3 . 0 0 ]
snom technology AG • 81
[
S N O M
1 9 0 A
D M I N I S T R A T O R
M
A N U A L
V 3 . 0 0 ]
This setting is switched off by default. You can set a timeout after
which a number is dialed automatically without pressing the key or
taking the cradle off hook.
Number Guessing
Here, the number guessing functionality can be activated or
deactivated.
Block URL Dialing
You can block the dialing of sip urls by turning this setting on. In
this case only numeric numbers will be allowed as input.
Deny All Feature
When turned on, this setting shows “Deny All” softkey on
incoming calls to put the incoming numbers in the Deny List. Turning it off
will disable this feature.
Challenge Response on Phone
As explained in an earlier chapter, snom phones can handle
challenge responses on the phone. Turning this setting off will disable this
feature and you will only be able to handle authentication through the
web interface of the phone.
Broadsoft Call Control Features
Support for Broadsoft call control can be enabled here.
Call Waiting Indication
You can enable or disable the CWI on the phone through this
setting.
Dialtone during Hold
Turning this setting on will produce a dial tone when a call is
being held and the user is trying to dial the second number. Otherwise a
dial tone will not be played.
Disconnect on Onhook
Sometimes it is useful to disable disconnection of a call when the
handset is placed Onhook, e.g. during conference calls or handsfree mode
etc. This can be achieved by turning this setting off.
5