Sprint Nextel MOTOKRZR K1M - Manual (Page 133)

Section 2I: Using the microSD Card 117
micr
o
S
D C
a
rd
To insert the microSD card into your phone:
1. With your phone powered off, remove the back cover
and then remove the battery. (See “Removing the
Battery” on page 24.)
2. Gently place the microSD card on the cardholder as
shown below.
3. Replace the battery and the back cover.
Tip: The writing on the microSD card should face up.
Note: Make sure your battery is fully charged before using the
microSD card. Your data may become damaged or unusable if
the battery runs out while using the microSD card.
Be sure to use only recommended microSD cards (64MB —
2GB). Using non-recommended microSD cards could cause
data loss and damage your phone.