Sakar 87480 User Manual
Page 10
10
When the Low Battery icon
is flashing, you need to replace your camera’s batteries. If you do
not have an SD memory card in the camera, please download any photos you have on the camera
before opening the battery compartment.
Note: If you do not intend to use your camera for an extended period, remove the batteries to avoid
battery leakage and corrosion.
Installing an Optional Memory Card
Your camera has a memory card slot that enables
you to insert any “SD” compatible memory card.
Adding a memory card will allow you to increase
the capacity of your DV camera before you have
to transfer photos/videos to a PC. Photos and
videos stored in this manner will not be lost
regardless of any change in battery power.
Note:
Limited internal memory is provided for test images. Those images may be deleted when
camera power is turned off. SD memory card is required for normal use.
Installing the SD Memory Card:
1.
Locate the Memory card slot (on the bottom of the camera) as illustrated above.
2.
Insert the memory card into the slot, label side down and metal contacts up.
3.
Push the card in until you feel it "click" into position. The top of the card should be flush
with the surface of the camera. A “C” icon will be visible on the LCD screen (to the left of
the battery indicator) indicating that an external memory card is installed.