Datasheet – SMSC USB2512Ai User Manual

Page 17

Advertising
background image

Industrial Temperature Rated USB 2.0 Hi-Speed 2-Port Hub Controller

Datasheet

SMSC USB2512Ai

17

Revision 1.97 (08-11-08)

DATASHEET

4.2.1.8

Register 07h: Configuration Data Byte 2

0

PORT_PWR

Port Power Switching: Enables power switching on all ports simultaneously
(ganged), or port power is individually switched on and off on a port- by-port
basis (individual). The ability to support power enabling on a port or ganged
basis is hardware implementation dependent.

0 = Ganged switching (all ports together)
1 = Individual port-by-port switching

BIT

NUMBER

BIT NAME

DESCRIPTION

7

DYNAMIC

Dynamic Power Enable: Controls the ability of the Hub to automatically
change from Self-Powered operation to Bus-Powered operation if the local
power source is removed or is unavailable (and from Bus-Powered to Self-
Powered if the local power source is restored). {Note: If the local power
source is available, the Hub will always switch to Self-Powered operation.}

When Dynamic Power switching is enabled, the Hub detects the availability
of a local power source by monitoring the external LOCAL_PWR pin. If the
Hub detects a change in power source availability, the Hub immediately
disconnects and removes power from all downstream devices and
disconnects the upstream port. The Hub will then re-attach to the upstream
port as either a Bus-Powered Hub (if local-power is unavailable) or a Self-
Powered Hub (if local power is available).

0 = No Dynamic auto-switching
1 = Dynamic Auto-switching capable

6

Reserved

Reserved

5:4

OC_TIMER

OverCurrent Timer: Over-current Timer delay.

00 = 0.1 ms
01 = 4.0 ms
10 = 8.0 ms
11 = 16.0 ms

3

COMPOUND

Compound Device: Allows OEM to indicate that the Hub is part of a
compound (see the USB Specification for definition) device. The
applicable port(s) must also be defined as having a "Non-Removable
Device".

Note:

When configured via strapping options, declaring a port as non-
removable automatically causes the hub controller to report that it
is part of a compound device.

0 = No
1 = Yes, Hub is part of a compound device

2:0

Reserved

Reserved

BIT

NUMBER

BIT NAME

DESCRIPTION

Advertising