Docking station – Sony VAIO VGN-Z500 Series User Manual
Page 220
Troubleshooting
Docking Station
Why can't I use my TFT/DVI monitor connected to the DVI-D port?
The DVI-D port on the docking station is disabled when your computer is in STAMINA mode. Change the performance mode
to SPEED mode before connecting a display cable to the port. See Selecting Performance Modes
for mode
selection.
What should I do if an error message appears when I press the UNDOCK button or select
Undock Computer from the Start menu?
❑ When any device inserted or connected to the docking station is in use, you cannot disconnect your computer from the
docking station. Save unsaved data, exit applications using such devices, and then try again.
If the above does not work, shut down your computer and disconnect it from the docking station.
❑ Be sure to return to the original log-on user before disconnecting your computer from the docking station. An attempt to
disconnect it as any other user may cause malfunctions.
For switching users, see Windows Help and Support.