Sunrise Medical Quickie S-626 - Manual (Page 16)

930570 Rev. C
I X . S e t - u p , A d j u s t m e n t & U s e 31
b) Armrest can now be easily removed for
transferring.
4. Height Adjustment (option)
a) Release the upper securing lever (C).
b) Set at desired height.
c) Return securing lever to locked position.
d) Move armrest up or down to allow armrest to
snap into place.
K. HEIGHT-ADJUSTABLE ARMRESTS (OPTIONAL)
1. Installation
a) Slide the outer armpost into the receiver
mounted to the wheelchair frame.
b) The armrest will automatically lock into place.
2. Height Adjustment
a) Rotate release lever to stop.
b) Slide armrest pad up or down to desired height.
c) Return lever to locked position.
d) Push arm pad until upper armpost locks firmly
into place.
3. Removing Armrest
a) Rotate release lever and remove the armrest.
4. Replacing Armrest
a) Slide armrest back into receiver.
b) Return release lever to locked
position against armpost.
5. Adjusting Armrest Receiver Fit
To tighten or loosen the fit of the outer armpost in the
receiver:
a) Loosen the four bolts on the sides of the
receiver.
b) With the armrest in the receiver, squeeze the
receiver to achieve the desired fit.
c) Tighten the four bolts.
6. Adjusting Inner Armpost Fit
a) Two set screws are installed in the outer arm-
post.
b) Turn the set screws in or out until the desired
fit is achieved.
I X . S e t - u p , A d j u s t m e n t & U s e
930570 Rev. C
30
H. TO ADJUST THE HEIGHT OF THE REMOTE JOYSTICK
a) Remove the two pan-head screws (A), securing
the angle bracket mount (B).
b) Remove the Joystick from the mount by unfas-
tening the two screws (C) on the underside of
the mount.
c) Position angle bracket mount such that you
achieve the desired joystick height. Four posi-
tions are available by relocating the mount
either on the top or bottom of the mounting
bar (D) and/or by rotation of the angle
bracket mount.
I. REMOTE JOYSTICK SWING-AWAY RETRACTABLE
MOUNT (OPTIONAL)
The remote joystick is mounted with a mechanism
which allows the control to be locked in a forward or
retracted position using magnets.
1. Adjustment
a) To retract joystick, push outward on side of joy-
stick.
b) Push joystick away from front of armrest until it
locks into retracted position.
c) To return to forward position push joystick
forward until it locks into place.
J. DUAL-POST HEIGHT-ADJUSTABLE
FLIP-BACK ARMRESTS
The dual-post flip-back armrest can be used as either a
flip-back armrest or a removable armrest.
1. Installing Armrest
a) Insert front and rear posts into armrest receivers.
b) Engage levers (A) and (B) to secure
armrest.
2. Set-up for Flip-back Operation
a) Disengage lever (A) so front post is able to
come free.
b) Armrest now has the ability to be flipped back
without removal.
3. Removal of Armrest
a) Disengage both levers (A and B) so front and rear
post are able to come free.
A
B
A
C
B
D
C
Height-Adjustable Armrest Key
1. Inner Arm Post
2. Receiver
3. Release Lever, Locked Position
4. Armrest Pad
5. Transfer Bar
6. Side Panel
7. Tension Adjustment Set Screw
8. Outer Arm Post
9. Receiver Adjustment Bolts
10. Receiver Release Lever
1
2
3
4
5
6
7
8
9
10