Sony Ericsson J220a - Manual (Page 8)

7
1
Press to release the cover as shown in the picture.
2 Gently pull the cover away from the phone.
3 Insert the SmartChip. Make sure the SmartChip is placed
under the silvery holders.
4
Place the battery on the back of the phone with the label
side up and the connectors facing each other.
5
Replace the cover as shown in the picture.
6
Press to close the cover.
To charge the battery
1 Connect the charger to the phone. The flash symbol
1 on the charger plug must face upwards.
2 It may take up to 30 minutes before the battery icon
appears on the screen.
3 Wait approximately 4 hours or until the battery icon
indicates that the battery is fully charged. If you do
not see the battery icon after this time, press any key
to activate the screen.
4 Remove the charger by pulling it out.
The time and date are reset when you remove the battery.
This is the Internet version of the user’s guide © Print only for private use.