Samsung DA99-01906A - Manual (Page 13)

01
s
E
tting
u
P
setting up _1
sEtting uP tHE rEfrigErator
Now that you have your new refrigerator installed and in place, you are ready to set up and
enjoy the full features and functions of the appliance.
By completing the following steps, your refrigerator should be fully operational.
If not, first check the power supply and electricity source or try the troubleshooting section
at the back of this user guide. If you have any further questions, contact your Samsung
Electronics service center.
1. Place the refrigerator in an appropriate location with reasonable clearance
between the wall and the refrigerator. Refer to installation instructions in this
manual.
2. Once the refrigerator is plugged in, make sure the interior light comes on when
you open the doors.
3. Set the temperature control to the coldest temperature and wait for an hour.
The freezer should get slightly chilled and the motor should run smoothly.
4. After powering the refrigerator, it will take a few hours to reach the appropriate
temperature. Once the refrigerator temperature is sufficiently cool, you can
store food and drink in the refrigerator.