Seiko BX-900 - Manual (Page 122)

ITEM SYMBOL Hexadecimal Decimal FUNCTION
[68] ESC a n [1B,61,n] H [27,97,n] D Justification mode.
n=0: left justification is set (default)
n=1: centering is set
n=2: right justification is set
n=3: full justification is set
When n is other than 0, the printer performs one
linefeed after printing.
[69] ESC b c n1 n2 [1B,62,c,n1,n2,...,n16,00] H Sets vertical tab position in channels beginning from
...n16 NUL [27,98,c,n1,n2,...,n16,0] D n1 and end with NUL [00]H as in ESC b command.
c specifies one of channels 0 to 7 to be set.
[70] ESC g [1B,67] H [27,103] D Sets 15cpi mode.
[71] ESC j n [1B,6A,n] H [27,106,n] D n/180" reverse linefeed after printing (0
≤
n
≤
255).
This command is ignored in the cut sheet feeder mode.
[72] ESC k n [1B,6B,n] H [27,107,n] D Selects font type.
n=00h: ROMAN is selected
n=01h: SANS SERIF is selected
n=02h: COURIER is selected
n=03h: PRESTIGE is selected
n=04h: SCRIPT is selected
n=05h: OCR-B is selected
n=06h: OCR-A is selected
n=07h: ORATOR is selected
n=08h: ORATOR-S is selected
n=14h: GOTHIC is selected
[73] ESC l n [1B,6C,n] H [27,108,n] D Sets left margin at the nth horizontal space in the
current print mode.
The left margin can be set a distance of up to 8" from
the left end of the carriage.
[74] ESC p n [1B,70,n] H [27,112,n] D Sets or cancels proportional mode.
n=0: the proportional mode is cancelled
n=1: the proportional mode is set
[75] ESC q n [1B,71,n] H [27,113,n] D Sets character style.
n=0: plain style is set
n=1: outline style is set
n=2: shadow style is set
n=3: outline with shadow style is set
[76] ESC t n [1B,74,n] H [27,116,n]D Selects character code table.
n=00,30:Selects the italic character table.
n=01,31:Selects the graphic character table.
n=02,32:Selects the downloaded character table.
n=03,33:Selects the graphic character table.
If downloaded characters cannot be printed when the
downloaded character table is selected, italic
characters are printed. The selected character table is
chantged eith the ETS(t command.
[77] ESC w n [1B,77,n] H [27,119,n] D Sets or cancels double height character mode.
n=0: the double height character mode is cancelled
n=1: the double height character mode is set
[78] ESC x n [1B,78,n] H [27,120,n] D Selects character quality.
n=0: draft character mode is set
n=1: LQ character mode is set
114
B. Control code summary (Epson)