Stanton DJ FOCUS SIGNATURE MIXER SA-8 - Manual (Page 2)

P L E A S E R E A D C A R E F U L L Y B E F O R E U S E
FA I L U R E TO F O L L O W T H E I N S T R U C T I O N S P R I N T E D B E L O W M AY V O I D WA R R A N T Y
• Follow all security advice printed on your mixer
• When removing the unit's AC plug from the power source, grasp and pull
the plug, NEVER the cord itself!
• Avoid placing your mixer near heat sources, such as power amplifiers.
• When in use, place your mixer on a stable surface, away from vibration.
Always use care when carrying your mixer. Impact, or heavy vibration may
compromise the unit's mechanical integrity. The manufacturer is not
responsible for damage resulting from an impact, or misuse.
• When in use, place your mixer away from sources of hum or noise, such as
transformers, or electric motors.
• To prevent overheating, always provide your mixer with adequate
ventilation air space.
• Avoid stepping on your mixer's AC cord. Repeated compression of the cord
may lead to electrical shorting.
• To avoid damage due to AC voltage peaks, always disconnect your mixer
from the power source during electrical storms. If possible connect mixer to
a surge protector.
• Your mixer contains no user-serviceable parts. The manufacturer is not
responsible for any damage or personal injury resulting from unauthorized
user-servicing or modifications. In addition, the warranty will be void if any
unauthorized service by the user is detected. Always return your mixer to
an authorized Stanton dealer for servicing.
Thank you for making Stanton your first choice in professional DJ mixers.
This innovative family of mixers has been developed with input from the
professional DJ community, bringing to the marketplace a previously unavailable,
affordable combination of user-friendly, functional design, rugged construction,
and professional quality features.
Stanton and your authorized Stanton dealer are dedicated to your complete
satisfaction by offering benchmark service and support throughout the long life of
your Stanton product.
Again, we appreciate your patronage, and look forward to many years of making
music together.
T E C H N I C A L S P E C I F I C AT I O N S
Line inputs: 2 (RCA) x 2 channels, -10 dBV / 37 kOhm
Phono inputs: 2 (RCA) x 2 channels, -50 dBV / 47 kOhm
Aux inputs: 2 (RCA) -10 dBV /22 kOhm
Return inputs: 2 (1/4"), -10 dBV / 22 kOhm
Send output: 2 (1/4"), -10 dBV
Master output: 2 (1/4") Balanced /(RCA) unbalanced,
+4 dBu balanced / -10 dBV unbalanced
Program outputs: 2 (1/4")balanced x 2 channels, +4 dBu / 100 Ohms
Booth output: 2 (RCA), -10 dBV / 100 Ohms
Headphone output: 2 (1/4 inch), greater than 32 Ohm load
Frequency Response: 20 Hz - 20 kHz, + 1/-2 dB
Tone Control : + 9/-20 dB (Hi, Mid, Low)
Max Gain: 14 dB
S/N Ratio: Better than 100 dB (ref: max input level)
T.H.D: Less than 0.05% (1 kHz)
Dimension(LxWxD): 12.6" x 9.25" x 4.72" (320mm x 235mm x 120mm)
Weight: 7.3 Lbs (3.3 kgs)