Sony CDP-XB740 - Manual (Page 14)

Playing CDs
14 GB
Creating a programme using the remote Z
1
Press PROGRAM before you start playing.
“PROGRAM” appears in the display.
2
Press the number buttons of the tracks you want to
programme in the order you want.
Example: To programme the tracks 2, 8 and 5.
Press the number buttons in the order
2, 8 and 5.
To select a track with a number over 10
Use >10 button (see page 11).
If you’ve made a mistake
Press CLEAR, then press the correct track number.
3 Press H to start Programme Play.
To cancel Programme Play
Press CONTINUE.
z You can check the total playing time while
programming using the remote (Programme Edit)
To select a track, press . or > and check the total
playing time. Then press PROGRAM to confirm your
selection.
Notes
• The total playing time doesn’t appear in the display when it
exceeds 100 minutes.
• If you programme a track numbered over 24, “– – . – –”
appears instead of the total playing time.
• “PROGRAM FULL” appears in the display when you try to
add a track to a programme which already contains 24
tracks.
PROGRAM
CLEAR
Number buttons
CHECK
>10
H
To cancel Programme Play
Press PLAY MODE.
z When tracks, which aren’t numerically consecutive on
the disc, are programmed consecutively (i.e. 1, 3, 5
etc.)
A one-second access time blank is added between the
tracks.
z The programme remains until erased (see page 15) or
until you press A OPEN/CLOSE
The programme you have created remains even after the
Programme Play mode ends or you select another play
mode.
Notes
• The total playing time doesn’t appear in the display when it
exceeds 100 minutes.
• If you programme a track numbered over 24, “– – . – –”
appears instead of the total playing time.
• “PROGRAM FULL” appears in the display when you try to
add a track to a programme which already contains 24
tracks.