Sonos CONTROLLER 200 - Manual (Page 12)

Sonos Controller 200 2
ENGL
ISH
DE
U
TSCH
NE
DERL
ANDS
SVEN
SKA
Before You Begin
If you are setting up a new Sonos Multi-Room Music System, Sonos recommends you
set up at least one ZonePlayer (or ZoneBridge) before adding a Sonos Controller 200
to your music system. For help with this step, you can refer to the Quick Setup
Instructions included with your ZonePlayer(s).
Once you’ve got one or more zones set up, connect the power adapter to the back of
the charging cradle (included) and plug the cradle into a power outlet. Place the
Controller 200 into the charging cradle to wake it up (the screen will come alive when
it’s ready), and then follow the Controller’s on-screen instructions to add it to your
Sonos Multi-Room Music System.
For battery charging or battery replacement information, you can turn to page 13.
Note: The Sonos Controller 200 is compatible with Sonos software
version 3.0 or later. If you are adding to an existing Sonos system, use
the Desktop Controller software to check for the latest Sonos software
update by selecting Help→Check for Updates. Once you update your
music system, you can add the Sonos Controller 200.