Shark SC630WC - Manual (Page 5)

2 TOLL FREE: 1-877-304-7670 3 www.sharkclean.com
English Getting Started
FIRST THINGS FIRST, YOU NEED TO KNOW
WHAT’S IN THE BOX YOU JUST OPENED:
a Steam Bottle
b Extension Hose
c Wedge Cleaning Tool
d Cylinder Cleaning Tool
e Detail Cleaning Handle
f 2 Detail Brush Accessories
g Garment Steamer Diffuser
h Garment Brush Attachment
i Garment Steamer Bonnet
j Filling Flask
k Direct Steam Nozzle
l 2 All-Purpose Wedge Cleaning Pockets
m 2 All-Purpose Cylinder Cleaning Pockets
n Steam Duster Cylinder Cleaning Pocket
o Scrubbing Wedge Pocket
p Squeegee Wedge Pocket
q Nozzle Cleaner
r Tot e Bag (not shown)
ASSEMBLY & USE INSTRUCTIONS
1 Safely remove contents of the
Portable Steam Pocket ® Cleaning
System and lay them out on a flat
surface to see that you have all
the components to complete the
assembly.
2 READ ALL INSTRUCTIONS BEFORE
USING YOUR PORTABLE STEAM
POCKET
® .
IMPORTANT: Always make sure the
steam bottle is UNPLUGGED from
the electrical outlet when not in use.
Never fill the water reservoir when
the unit is plugged in.
3 Only use water. To extend the life
of your Portable Steam Pocket
® , we
recommend using distilled water.
If you live in an area with hard tap
water, we recommend using distilled
water.
4 Do not add cleaning solutions,
scented perfumes, oils, or any other
chemicals to the water used in
this appliance as this may damage
the unit or make it unsafe for use.
Use of any substances other than
manufacturer’s recommended
accessories will automatically void
your warranty.
3
Your Portable Steam Pocket ® is
designed to clean surfaces that will
withstand high heat and moisture. Do
not use on unsealed wood surfaces
(especially wooden antique furniture),
unglazed ceramic tile, painted surfaces
or surfaces that have been treated with
wax, oils, varnishes, or shellac. The
sheen may be removed by the heat,
steam, and friction of the cleaning
tools. Lacquer and polyurethane
coatings provide a hard durable
protective finish that withstands
moisture but it is always recommended
to test an isolated area of the surface to
be cleaned before proceeding.
We also recommend you check the use
and care instructions from the surface
manufacturer.
When cleaning finished wood surfaces,
use broad, continuous cleaning strokes.
To prevent surface damage, avoid
focusing steam or alowing the cleaning
tools to sit in one spot for any amount
of time.
When assembling your Portable Steam
Pocket
® , there may be a little water in
the water tank. This is because we test
all our portable steam pocket cleaning
systems 100% before you buy them, so
you get a quality Shark Steam product.
FILLING AND REFILLING THE WATER
TANK
1 Never fill the steam bottle while
plugged into an electrical outlet.
2 Disconnect the power cord before
filling the water tank.
3 Turn the water tank cap counter
clockwise and remove to fill, using
the filling flask provided. Be careful
not to overfill. Replace the cap by
turning clockwise.
a
c d
f g
k j
i e h
b
q
m
n
l
o
p
SC630WC_IB_En_100119.indd 2-3 1/26/10 12:13 PM