Solid State Logic MadiXtreme MADI I/O - Manual (Page 4)

2
Safety and Installation Considerations
This section contains definitions, warnings, and practical information to ensure a safe working environment.
Please take time to read this section before installing or using this unit. Please do not dispose of these instructions.
General Safety
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Do not expose this apparatus to rain or moisture.
• Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus (including amplifiers) that produce heat.
• There are no user-adjustments, or user-serviceable items, on this
apparatus.
• Adjustments or alterations to this apparatus may affect the
performance such that safety and/or international compliance
standards may no longer be met.
Caution
• To reduce the risk of electric shock, do not perform any servicing
other than that contained in these Installation Instructions unless you
are qualified to do so. Refer all servicing to qualified service
personnel.
Installation Notes
• When installing this apparatus, place the host system into which it is
to be installed on a secure level surface.
• To prevent damage from static electricity when installing this
apparatus, either to the host system or to this apparatus, always take
proper anti-static precautions. Always use an anti-static wristband. If
in doubt, please refer to qualified service personnel.
• Take care of rough or sharp edges when accessing the inside of the
host system.
• Never install or remove this apparatus whilst the host system is
powered. Always remove the power cord from the host system prior
to accessing this apparatus.
• If in doubt about installing this apparatus, please refer to qualified
service personnel.