SonicWALL OS 2.x - Manual (Page 2)

Sonic OS 2.x Quick Start Guide
Introduction
This guide walks you through the steps required to configure a typical customer network using the
new SonicOS 2.x Enhanced firmware. If you are familiar with Sonicwall’s existing products and
firmware, this guide will help you make the transition from those products to the next generation of
Sonicwall firmware.
The example network used throughout this guide is illustrated below:
192.168.1.1 / 24
Default Gateway
192.168.1.1
192.168.168.1 / 24
Default Gateway
192.168.168.168
SonicWALL
PRO 4060
Remote User with Global
VPN Client
LAN (X0)
WAN 1 (X1)
T1
Router IP: 208.48.32.1 / 29
WAN 2 (X2)
DMZ (X3)
Public WWW Server
10.0.0.2 / 24 (208.48.32.3)
Mail Server
192.168.168.4 / 24
192.168.168.168 /
208.48.32.2 / 29
SonicWALL
TZ 170e
WAN
10.0.0.1 / 24
Default Gateway 10.0.0.1
PPPoE DSL
10.0.0.1 / 24
PPPoE DSL
LAN
192.168.1.1/24
1