Sony CPD-E230 - Manual (Page 4)

4
Adjustments
Navigating the menu
1 Press the MENU/OK button to display the main menu.
2 Move the joystick m/M to highlight the main menu you
want to adjust and press the MENU/OK button.
3 Move the joystick m/M to highlight the sub menu you
want to adjust. Then move the joystick </, to make
adjustments.
Adjusting the brightness and contrast
Brightness and contrast adjustments are made using a separate
BRIGHTNESS/CONTRAST menu. These adjustments are
effective for all input signals.
1 Move the joystick in any direction to display the
BRIGHTNESS/CONTRAST menu.
2 Move the joystick m/M to adjust the brightness ( ),
and </, to adjust the contrast ( ).
,
60 . 0 kHz / 75Hz
1024 768
the horizontal
and vertical
frequencies
of the current
input signal the resolution of the current
input signal (only if the signal
matches to one of the
recommended VESA timing
modes).
Main menu
, ,
Sub menu
2 6
S I ZE / CENTER
2 6 2 6
BR I GHTNESS / CONTRAS T