Smooth Fitness V2300 - Manual (Page 19)

19
“
C
ONSOLE
I
NSTRUCTIONS ”
CONSOLE FUNCTIONS
SCAN Automatically scans TIME, SPEED, CALORIE, PULSE, and DISTANCE in sequence with a
change every five seconds. Press and release the MODE button until the arrow points to
"SCAN”
TIME
TIME:

Count Up: If a target time was not selected, TIME will count up from 0:00 to maximum
99:59 minutes
 Count Down: If you have set the target time, the console will count down from that
selected target time down to 0:00
SPEED Displays the current speed
DISTANCE  Count Up: If a target distance was not selected, this value would measure the total
distance from 0:00 to 999 miles
 Count Down: If you have set the target distance, the console will count down from that
selected target distance down to 0
CALORIES CALORIES:

Count Up: If target calories were not selected, this value measures total calories your body
burned during exercise
 Count Down: If you have set the preference value of calories, the console will count down
from that selected target calories down to 0
PULSE
HEART RATE:

You must place both of your hands on the Pulse Sensors on the Handlebar. Your pulse
will be displayed approximately few seconds after the heart symbol “ ” is displayed
 If you do not place your hands correctly and a few seconds passes without a pulse input,
the console will turn off the pulse circuit. Place your hands back on the Pulse Sensors
correctly, the pulse readout will appear again
TENSION
LEVEL You can change the torque/tension level (from 1 to 8 levels) at any time during workout by
pressing
UP or DOWN button
PROGRAM DESCRIPTIONS
MANUAL
P1 is a manual program allowing the user to have full manual control of the workload. Use the
"UP" button to increase the Tension Level. Use the "DOWN" button to decrease the Tension
Level
PROGRAMS 1-5
P1 to P5 are preset automatic programs. The profiles are shown on the face of the console. Use
the "UP" button to increase the tension level of the program. Use the "DOWN" button to
decrease the tension level of the program
PROGRAM 6
(TARGET H.R.)
Program 6 allows you to select the TARGET HEART RATE you desire, from 90 to 220 BPM
(beats per minute) ; 1 BPM increment
 If you current pulse > (the value of the TARGET HEART RATE), the console
would decrease one resistance/torque level automatically
 If you current pulse < (the value of the TARGET HEART RATE), the console
would increase one resistance/torque level automatically