Seiko TM-U590/U590P - Manual (Page 37)

Troubleshooting 3-5
9) As a check paper, insert a cleaning sheet into a printer.
* Set yellow non-stick side to be upside when cleaning using
adhesive sheet.
10) Remove and do a sheet after cleaning sheet discharge.
11) Turn off the power switch.
Command code sequence
1) MICA cleaning command <FS c> was installed to clean up.
2) Carry our from 8) to 10) described above in the self test mode.
NOTES
In case of using an adhesive cleaning sheet,
1) peel off only desinated pasteboard.
2) insert from correct derection, and
3) insert as peeled portion to be upside.
Explanatin of a cleaning sheet
Moistened Cleaning sheet
PRESAT brand (KIC) “CHECK READER CLEANING CARD” or
equivalent cleaning sheet is required.
Adhesice cleaning sheet (Refer to Figure 2)
Part Name : Sheet roller cleaning, A
Part Number : 1038046